Chapter 12 Phone Usage; Dialing A Telephone Number; Using Speed Dial To Dial A Telephone Number; Internal Calls - ZyXEL Communications Network Device P-2602 User Manual

This chapter describes how to use a phone connected to your ZyXEL Device for basic tasks.

12.1 Dialing a Telephone Number

The PHONE LED turns green when your SIP account is registered. Dial a SIP number like
"12345" on your phone's keypad.
Use speed dial entries (see
that use letters. Dial the speed dial entry on your telephone's keypad.
Use your VoIP service provider's dialing plan to call regular telephone numbers.

12.2 Using Speed Dial to Dial a Telephone Number

After configuring the speed dial entry and adding it to the phonebook, press the speed dial
entry's key combination on your phone's keypad.

12.3 Internal Calls

Press "####" on your phone's keypad to call the ZyXEL Device's other phone port.

12.4 Checking the Device's IP Address

Do the following to listen to the ZyXEL Device's current IP address.
1 Pick up your phone's receiver.
2 Press "****" on your phone's keypad and wait for the message that says you are in the
configuration menu.
3 Press "5" followed by the # key.
4 Listen to the IP address and make a note of it.
5 Hang up the receiver.

Chapter 12 Phone Usage

C
H A P T E R
Section 11.17 on page 172) for peer-to-peer calls or SIP numbers
P-2602H(W)(L)-DxA Series User's Guide
Phone Usage
1 2
179