Manually Assign A Wep Key; Figure 27 Manually Assign A Wep Key; Table 14 Manually Assign A Wpa Key - ZyXEL Communications Network Device P-2602 User Manual

P-2602H(W)(L)-DxA Series User's Guide
The following table describes the labels in this screen.

Table 14 Manually Assign a WPA key

LABEL
Pre-Shared
Key
Back
Next
Exit

3.3.2 Manually Assign a WEP key

Choose Manually assign a WEP key to setup WEP Encryption parameters.

Figure 27 Manually Assign a WEP key

68
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Internet and Wireless Setup Wizard