Port Forwarding Rule Edit; Figure 82 Port Forwarding Rule Setup; Table 50 Port Forwarding Rule Setup - ZyXEL Communications Network Device P-2602 User Manual

P-2602H(W)(L)-DxA Series User's Guide
Table 49 Port Forwarding
LABEL
Modify
Apply
Cancel

10.5.1 Port Forwarding Rule Edit

To edit a port forwarding rule, click the rule's edit icon in the Port Forwarding screen to
display the screen shown next.

Figure 82 Port Forwarding Rule Setup

The following table describes the fields in this screen.

Table 50 Port Forwarding Rule Setup

LABEL
Active
Service Name
Start Port
End Port
Server IP
Address
Back
148
Click the edit icon to go to the screen where you can edit the port forwarding rule.
Click the delete icon to delete an existing port forwarding rule. Note that
subsequent address mapping rules move up by one when you take this action.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to return to the previous configuration.
Click this check box to enable the rule.
Enter a name to identify this port-forwarding rule.
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port field.
To forward a series of ports, enter the start port number here and the end port
number in the End Port field.
Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port field above
and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with
the port number in the Start Port field above.
Enter the inside IP address of the server here.
Click Back to return to the previous screen.
Chapter 10 Network Address Translation (NAT) Screens
DESCRIPTION
DESCRIPTION