Figure 20 Internet Connection With Pppoa; Table 10 Internet Connection With Enet Encap; Table 11 Internet Connection With Pppoa - ZyXEL Communications Network Device P-2602 User Manual

The following table describes the fields in this screen.

Table 10 Internet Connection with ENET ENCAP

LABEL
Obtain an IP
Address
Automatically
Static IP
Address
IP Address
Subnet Mask
Gateway IP
address
First DNS
Server
Second DNS
Server
Back
Apply
Exit

Figure 20 Internet Connection with PPPoA

The following table describes the fields in this screen.

Table 11 Internet Connection with PPPoA

LABEL
User Name
Password
Chapter 3 Internet and Wireless Setup Wizard
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.
Select Static IP Address if your ISP gave you an IP address to use.
Enter your ISP assigned IP address.
Enter a subnet mask in dotted decimal notation.
Refer to the appendix to calculate a subnet mask If you are implementing subnetting.
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
As above.
Click Back to go back to the previous wizard screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Exit to close the wizard screen without saving your changes.
DESCRIPTION
Enter the login name that your ISP gives you.
Enter the password associated with the user name above.
P-2602H(W)(L)-DxA Series User's Guide
63