Advanced Analog Phone Setup Screen; Figure 92 Phone > Analog Phone > Advanced; Table 58 Phone > Analog Phone > Advanced - ZyXEL Communications Network Device P-2602 User Manual

P-2602H(W)(L)-DxA Series User's Guide
Table 57 Phone > Analog Phone
LABEL
Apply
Cancel
Advanced Setup

11.14 Advanced Analog Phone Setup Screen

Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
Figure 92 Phone > Analog Phone > Advanced
Each field is described in the following table.
Table 58 Phone > Analog Phone > Advanced
LABEL
Analog Phone
Voice Volume
Control
Speaking Volume
Listening Volume
Echo Cancellation
G.168 Active
166
DESCRIPTION
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.
DESCRIPTION
This field displays the phone port you see in this screen.
Enter the loudness that the ZyXEL Device uses for speech that it sends to the peer
device. -1 is the quietest, and 1 is the loudest.
Enter the loudness that the ZyXEL Device uses for speech that it receives from the
peer device. -1 is the quietest, and 1 is the loudest.
Select this if you want to eliminate the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Chapter 11 Voice