The Cpu / Memory Status Screen - ZyXEL Communications USG FLEX H Series User Manual

Table 205 Maintenance > Diagnostics > Packet Capture > Edit (continued)
LABEL
Save data to USB
storage
Save data to ftp server
Server Address
Server Port
Name
Password

27.4 The CPU / Memory Status Screen

Click Maintenance > Diagnostics > CPU / Memory Status to open the CPU/Memory Status screen. Use
this screen to view the CPU and memory performance of various applications on the Zyxel Device.
Chapter 27 Diagnostics
DESCRIPTION
Select this to have the Zyxel Device store packet capture entries only on a USB storage
device connected to the Zyxel Device if the Zyxel Device allows this.
Status:
Unused - the connected USB storage device was manually unmounted by using the
Remove Now button or for some reason the Zyxel Device cannot mount it.
none - no USB storage device is connected.
service deactivated - USB storage feature is disabled (in Configuration > System > USB
Storage), so the Zyxel Device cannot use a connected USB device to store system logs
and other diagnostic information.
available - you can have the Zyxel Device use the USB storage device. The available
storage capacity also displays.
Note: The Zyxel Device reserves some USB storage space as a buffer.
Select this to have the Zyxel Device store packet capture entries on the defined FTP site.
The available storage size is displayed as well.
Type the IP address of the FTP server.
Type the port this server uses for FTP traffic. The default FTP port is 21.
Type the login username to access the FTP server.
Type the associated login password to access the FTP server.
USG FLEX H Series User's Guide
417