Table of Contents
Advertisement
After all the routing information is updated, the computer can access the ZyXEL Device and
the Internet as if it is in the same subnet as the ZyXEL Device.
8.3 Configuring LAN IP
Click Network > LAN to open the IP screen. See
information.
Figure 55 LAN IP
The following table describes the fields in this screen.
Table 30 LAN IP
LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup
8.3.1 Configuring Advanced LAN Setup
To edit your ZyXEL Device's advanced LAN settings, click the Advanced Setup button in the
LAN IP screen. The screen appears as shown.
Chapter 8 LAN Setup
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Type the subnet mask assigned to you by your ISP (if given).
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
P-2602H(W)(L)-DxA Series User's Guide
Section 8.1 on page 107
for background
113
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
