The Status Screen; Figure 17 Status; Table 12 Status - ZyXEL Communications NSA-220 PLUS User Manual

2.7 The Status Screen

The Status screen is the first main web configurator screen you see after you enter the
administrator screens. To view the status screens, click Status on the top-left of the navigation
panel.

Figure 17 Status

The following table describes the labels in this screen.

Table 12 Status

LABEL
Status
System Information
Server Name
Model Name
Firmware Version
MAC Address
Media Server Status
FTP Server Status
Web Publishing Status This shows whether the Web server function is enabled or disabled. It
UPS
NSA-220 Plus User's Guide
DESCRIPTION
Click this to refresh the status screen statistics.
This displays the name which helps you find the NSA on the network.
Click the Edit icon to go to the screen where you can configure this.
This displays which model this NSA device is.
This is the NSA firmware version. Click the Edit icon to go to the
Maintenance > FW Upgrade screen from which you can upload new
firmware.
This displays the NSA's unique physical hardware address (MAC). You
need the MAC address to register the product at myZyXEL.com.
Customer support may also request it for troubleshooting purposes.
This shows whether the media server function is enabled or disabled. It
must be enabled for media clients to play content files stored on the NSA.
Click the Edit icon to go to the screen where you can configure this.
This shows whether the FTP server function is enabled or disabled. It
must be enabled to use FTP file transfer to/from the NSA. Click the edit
icon to go to the screen where you can configure this.
must be enabled to use HTTP to access shares on the NSA. Click the
Edit icon to go to the screen where you can configure this.
This shows the Uninterruptible Power Supply (UPS) capacity. Click the
Edit icon to go to the screen where you can configure this.
Chapter 2 Web Configurator Basics
47