3.1 Enable Arbitrary Waveform
Press Arb to enable arbitrary waveform function and open the operation menu of arbitrary
waveform.
Frequency/Period: set the "Frequency/Period" of the arbitrary waveform.
Amplitude/HighLevel: set the "Amplitude/HighLevel" of the arbitrary waveform.
Offset/LowLevel: set the output "Offset/LowLevel" of the arbitrary waveform.
Phase: set the "Start Phase" of the arbitrary waveform.
Align Phase: refer to
Type: select the built-in waveforms or user-defined arbitrary waveforms stored in external
memory of the instrument.
3.2 Select Arbitrary Waveform
HDG2000B allows the user to select any of the internal or external memory of the device for
waveform output.
Press "Arb" softkey, then press "type" softkey to select the instrument built-in waveform output.
Select more than 160 kinds of arbitrary waveform built in HDG2000B, as shown in the following
table. Press "type", select a type ("Math", "Project", "Distribution function" and "Trigonometric
function", "Window function" and "biology"), and press the corresponding softkey type to select
the desired waveform. Press Return key to return to main menu.
Name
Common
DC
AbsSine
AbsSineHalf
AmpALT
AttALT
GaussPulse
NegRamp
NPulse
PPulse
SineTra
SineVer
StairDn
StairUD
StairUp
Trapezia
Project
BandLimited
BlaseiWave
User Manual
"Align
Phase".
Description
DC signal
Absolute value of a Sine
Absolute value of half a Sine
Gain oscillation curve
Attenuation oscillation curve
Gauss pulse
Negative ramp
Negative pulse
Positive pulse
Sine-Tra waveform
Sine-Ver waveform
Stair-down waveform
Stair-up and stair-down waveform
Stair-up waveform
Trapezoid waveform
Bandwidth-limited signal
Time-velocity curve of explosive vibration
23