Chapter 6 Sweep - Hantek HDG2000B Series User Manual

Chapter 6 Sweep

In frequency sweep mode, the instrument moves from the start frequency to the stop frequency at
a specified sweep rate. You can sweep up or down in frequency with linea. You can also
configure the instrument to output one sweep from start frequency to stop frequency by applying
an external or manual trigger. The instrument can sweep sine, square, pulse, ramp, Harmonic or
arbitrary waveforms (DC are not allowed).
 Select Frequency Sweep
 Start Frequency and Stop Frequency
 Center Frequency and Frequency Span
 Linear sweep
 Sweep Time
 Return Time
 Hold Time
 Mark Frequency
 Sweep Trigger Source
 Trigger Output Edge
User Manual 57