Enable Arbitrary Waveform; Select Arbitrary Waveform - Hantek HDG3000BC Series User Manual

3.1 Enable Arbitrary Waveform

Press [Wave] >Arb softkey to enable the arbitrary waveformfunction and open the operation
menu of thearbitrary waveform.
To set the basic parameters of arbitrary waveforms, refer to "Set the Parameters".
Type: Select the built-in waveforms or user-defined arbitrary waveform stored in external storage.

3.2 Select Arbitrary Waveform

The HDG3000B(C) allows the user to select arbitrary waveform in the internal or external memory
of the instrument for output.
Press [Wave] >Arb>Typesoftkeyto select the built-in waveform.
Select more than 160 kinds of arbitrary waveform built in HDG3000B(C), as shown in the
following table.Press the softkey and select a type ("Math", "Project", "Distribution function" and
"Trigonometric function", "Window function" and "biology"), and press the corresponding softkey
type to select the desired waveform.
Build-In Waveform
Name
Common
DC
AbsSine
AbsSineHalf
AmpALT
AttALT
GaussPulse
NegRamp
NPulse
PPulse
SineTra
User Manual 25
Description
DC signal
Absolute value of a Sine
Absolute value of half a Sine
Gain oscillation curve
Attenuation oscillation curve
Gauss pulse
Negative ramp
Negative pulse
Positive pulse
Sine-Tra waveform