System Setting; Set The System Language; Power On Setting - Hantek HDG2000B Series User Manual

Refresh
Press Refrash softkey to refresh the file list.
New directory
Please make sure that a USB storage device is inserted and identified by the instrument.
1. In Store interface, press Win softkey to select "Disk" and use the knob to select the USB disk.
Press the knob to enter USB disk directory.
2. Press New softkey to enter the folder name input interface as shown in the figure above.
3. Press Type softkey to select Directory.
4. Operate the new folder following the introduction in "New File".

10.4 System Setting

10.4.1 Set the System Language

HDG2000B supports menus in Chinese and English as well as provides corresponding help
information, prompt messages and interface display.
Press Utility -> System -> Language to select the desired language. When "中文" or "English" is
selected, the menus, help information, prompt messages and interfaces are displayed in Chinese
or English.
When you press "Default" to recall the default settings, the language will not be affected.

10.4.2 Power On Setting

Set the configuration to be used when the instrument is powered on the next time to "Default" or
"Last". The default setting is "Default".
User Manual 78