Chapter 7 Burst - Hantek HDG2000B Series User Manual

Chapter 7 Burst

HDG2000B can output a waveform for a specified number of cycles, called a burst. It supports
control of burst output by internal, external or manual trigger source; supports three kinds of burst
types including N cycle, Infinite cycle and Gated. Burst is allowed with sine, square, ramp, pulse,
Harmonic, noise (allowed only in gated burst mode) or arbitrary waveforms (DC is not allowed).
 Select Burst Mode
 Burst Type
 Burst Period
 Burst Phase
 Burst Trigger Source
 Gate Polarity
 Trigger Output Edge
User Manual 62