Brief Introduction - Hantek HDG2000B Series User Manual

Brief Introduction

HDG2000B Series is a series of synthesized waveform generators with built-in arbitrary waveform
and pulse capabilities.
Features:
 7 inch, 16K true color TFT display, WVGA(800X480)
 100 MHz, 80 MHz, 60 MHz, and 30 MHz maximum sine output frequency
 16 bits resolution, 500MSa/s Sample rate
 64 Mpts Max. arbitrary waveform Memory Depth
 16 channels digital output
 Precisely adjust the phases of the two channels
 160 waveforms or functions: Sine, Square, Ramp, Pulse, Noise, Exponential Rise,
Exponential Fall, ECG, Gauss, Haversine, Lorentz, Dual Tones, Harmonics, Video Signal,
Radar Signal, DC etc.
 Rise Time and Fall Time of the Pulse could be adjusted separately
 Enable to output harmonic with specified order and amplitude, enable to output up to 16
order of harmonic
 Various modulation types: AM, DSB-AM, FM, PM, 2ASK, 2FSK, 2PSK, BPSK, QPSK, 3FSK,
4FSK, OSK and PWM modulations
 Support frequency sweep and Burst output
 Dual channels can perform internal /external /another channel modulation and
internal/external/manual trigger separately or at the same time.
 Dual channels can output sync signal separately or at the same time
 Provide 7digits/s, 100MHz counter; enable to measure various parameters of external signal
such as frequency, period, duty cycle, positive pulse width and negative pulse width
 Support waveform copy and state copy between channels
 Enable to store and recall arbitrary waveform data files and instrument state files;
 Standard interfaces: USB Host and USB Device
 Abundant I/O: waveform output, sync signal output, modulation input, 10MHz clock
input/output and trigger input/output
 Support FAT32 formated USB storage device (flash type) storage
 Support 10/100M Ethernet web; users can control the instrument remotely via web.
 LXI Class C Compliant
 Provide Chinese and English help information, prompt messages and interface display
 Provide powerful waveform editing PC software
 SCPI (Standard Commands for Programmable Instruments) compatibility
User Manual
th
4