Table 8 Ems Navigation Panel Sub-Link Descriptions - ZyXEL Communications 1 User Manual

NetAtlas Enterprise 1.00 User's Guide
The following table summarizes these sub-links in the navigation panel.

Table 8 EMS Navigation Panel Sub-link Descriptions

DESCRIPTION
MAP Screens
Add Submap/Device
Edit Node
Search Node
Delete
Refresh
Template
VLAN Template
Status Screens
Hardware Status
STP Status
VLAN Status
Port Status
802.1d
Performance
Interface
Fault Screens
Event Log
Loopback Test
Maintenance
Firmware Upgrade
Device Reset
NE (Network Element)
Configuration Backup
and Restore
Load Factory Default
Scheduled NE Config
Backup
Tool Screens
47
LABEL
This link takes you to a screen where you can add a device or a submap
folder to the EMS Device List Panel.
This link takes you to a screen where you can edit device properties.
This link takes you to a screen where you can search for a device or a
submap folder.
Click this link to delete a submap folder or devices within a folder.
Click this link to update the screen with the most recently saved settings.
This link takes you to a screen where you can pre-configure a template of
settings for upload to multiple devices.
This link takes you to a screen where you can view the hardware status of
a device.
This link takes you to a screen where you can view the software status of a
device.
This link takes you to a screen where you can view the VLAN status of a
device.
This link takes you to a screen where you can view the port status of a
device.
This link takes you to a screen where you can view the MAC addresses
(and types) of devices attached to what ports and VLAN IDs or view the
MAC addresses – IP address resolution table.
This link takes you to a screen where you can configure interface
performance graphs and tables.
This link takes you to a screen where you can configure an alarm filter.
This link takes you to a screen where you can perform a loopback test.
This link takes you to a screen where you can perform a device firmware
upgrade.
This link takes you to a screen where you can reset a device.
This link takes you to a screen where you can backup or restore
configuration files.
This link takes you to a screen where you can load the factory default
settings.
This link takes you to a screen where you can schedule when you want to
backup a device configuration file.
Chapter 2 EMS Main Window