Figure 27 Map Object Properties; Table 3 Required Map Object Properties - ZyXEL Communications 1 User Manual

NetAtlas Enterprise 1.00 User's Guide

Figure 27 Map Object Properties

3 Follow the instructions in the table below to set the specified fields in the Map Object
Properties screen.

Table 3 Required Map Object Properties

FIELD
Read Access Mode
Read/Write Access Mode
Read Community field
Read/Write Community field
Note: For security purposes, we strongly recommend you change the Read
Community and Read Read/Write Community defaults.
Write down this information in a secure place so you will not forget it later!
4 Click OK.
After the device has been found, the icon and label appear in the network manager view
window.
5 Right-click on the device icon to view a set of SMNPc network manager shortcuts. Click
Properties to verify the information you entered in the previous step.
37
VALUE
"SNMPV2c"
"SNMPV2c"
For initial configuration, "public" is the default for most devices.
After initial configuration, you assign this field.
For initial configuration, "public" is the default for most devices.
After initial configuration, you assign this field.
Chapter 1 Introducing the EMS