NetAtlas Enterprise 1.00 User's Guide
Figure 96 Configuration: Ethernet Port Configuration: Port 802.1x
The following table describes the fields in this screen.
Table 55 Configuration: Ethernet Port Configuration: Port 802.1x
LABEL
802.1x Active
Reauthentication
Reauthentication Timer
Apply
13.9 Port Security
13.9.1 About Port Security
Port security allows only packets with dynamically learned MAC addresses and/or configured
static MAC addresses to pass through a port on the switch. The switch can learn up to 16K
MAC addresses in total with no limit on individual ports other than the sum cannot exceed
16K.
For maximum port security, enable this feature, disable MAC address learning and configure
static MAC address(es) for a port. It is not recommended you disable Port Security together
with MAC address learning as this will result in many broadcasts. By default, MAC address
learning is still enabled even though the port security is not activated.
13.9.2 Configuring Port Security
Follow the steps below to configure the Port Security screen.
1 In the Device Panel list, select a device and then right-click.
133
DESCRIPTION
Select this checkbox to permit 802.1x authentication on this port. You must
first allow 802.1x authentication on the switch before configuring it on each
port.
Select On from the drop-down list box to periodically prompt a subscriber to
re-enter his or her username and password to stay connected to the port.
Specify how often a client has to re-enter his or her username and password
to stay connected to the port.
Click Apply to save the changes back to the switch.
Chapter 13 Ethernet Port Configuration