Table of Contents
Advertisement
Table 13 Status: Hardware Status (continued)
LABEL
Min
Threshold
Status
Temperature
Celsius
Fahrenheit
Index
Current Value
Max
Min
Threshold
Status
Polling
Close
5.2 STP Status
5.2.1 Introduction to Spanning Tree Protocol (STP)
STP detects and breaks network loops and provides backup links between switches, bridges or
routers. It allows a switch to interact with other STP-compliant switches in your network to
ensure that only one route exists between any two stations on the network.
5.2.1.1 STP Terminology
The root bridge is the base of the spanning tree; it is the bridge with the lowest identifier value
(MAC address).
Chapter 5 Status
DESCRIPTION
This field displays the minimum voltage recorded at this sensor in volts.
This field displays the minimum voltage percentage at which the switch should work.
NORMAL indicates that the voltage is within an acceptable operating range at this
point; otherwise ERROR is displayed. ABSENT indicates that there is no power
reading at a sensor(s).
The switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit).
Select this option to display the temperature in degrees Centigrade.
Select this option to display the temperature in degrees Fahrenheit.
This field displays the temperature sensor number.
This shows the current temperature at this sensor.
This field displays the maximum temperature recorded at this sensor.
This field displays the minimum temperature recorded at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays NORMAL for temperatures below the threshold and ERROR for
those above.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Apply
button.
Click Close to close the screen.
NetAtlas Enterprise 1.00 User's Guide
62
Advertisement
Table of Contents
