Appendix C Zynos Log Descriptions - ZyXEL Communications VANTAGE REPORT Manual

A
P P E N D I X
ZyNOS Log Descriptions
This appendix provides descriptions of example log messages for ZyNOS-based
devices. Log messages vary by device.
Table 210 System Maintenance Logs
LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client IP expired
DHCP server assigns %s
Successful SMT login
SMT login failed
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Starting Connectivity Monitor Starting Connectivity Monitor.
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Vantage Report User's Guide
DESCRIPTION
The router has adjusted its time based on information
from the time server.
The router failed to get information from the time
server.
A WAN interface got a new IP address from the DHCP,
PPPoE, PPTP or dial-up server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's SMT interface.
Someone has failed to log on to the router's SMT
interface.
Someone has logged on to the router's web
configurator interface.
Someone has failed to log on to the router's web
configurator interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via FTP.
Someone has failed to log on to the router via FTP.
The maximum number of NAT session table entries
has been exceeded and the table is full.
The router got the time and date from the Daytime
server.
The router got the time and date from the time server.
The router got the time and date from the NTP server.
The router was not able to connect to the Daytime
server.
C
481