Battery; The Keypad - Fluke MicroScanner Pro User Manual

Battery

M S P requires a 9 Volt Alkaline battery.
ICRO CANNER RO
The Battery icon is displayed on the screen when
M S P detects a low battery condition.
ICRO CANNER RO
Using M S P with a low battery may effect
ICRO CANNER RO
the test accuracy.
If M S P is stored for more than one month,
ICRO CANNER RO
the battery should be removed.
M S P will not function properly
ICRO CANNER RO
with a 9 Volt Carbon Battery.
Note

The Keypad

ON
OFF
When turned on, M S
ICRO
power-up test then resumes the test mode that was
last executed. M S
ICRO CANNER
when no cable is detected or when no key has been
pressed for 10 minutes.
To quickly change pairs or adjust values, press the
keys. These keys are active only if the indicators
are shown on the display.
MicroScanner Pro™
P flashes the LCD
CANNER RO
P turns off automatically
RO
Battery
5