Muting Pattern Selection Function (Only St4-C12Ex) - Panasonic ST4 Instruction Manual

Panasonic ST4 Instruction Manual

3.8 Muting Pattern Selection Function (Only ST4-C12EX)

The muting pattern selection function is incorporated only in ST4-C12EX.
The ST4-C12EX presets the muting patterns complying with ISO 12643 (Safety requirements
for graphic technology equipment and systems).
The muting pattern and the valid time of the muting/override can be set with the setting switches
"SW 1 to 4."
CAUTION
Make sure to turn off the power to set the muting pattern. If you set the muting
pattern while power is on, it will be invalid.
Muting
pattern no.
1
2
3
NOTE
If other settings than the preceding muting patterns are chosen, the device will
switch into lockout state, and an error will be indicated on the fault display (red).
SEN TRONIC
AG
Produkte, Support und Service
3.8 Muting Pattern Selection Function (Only ST4-C12EX)
Valid time
Muting Override
180s 60s
Rugghölzli 2
CH - 5453 Busslingen
Muting Override
No time 600s
restriction
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
67
mailbox@sentronic.com
www.sentronic.com