Periodic Inspection Checklist (Every Six Months) - Panasonic ST4 Instruction Manual

Safety beam sensor
Hide thumbs Also See for ST4:
Table of Contents

Advertisement

Panasonic ST4 Instruction Manual

4.2 Periodic Inspection Checklist (Every Six Months)

!
Check
Inspection item
column
The structure of the machine does not obstruct any of the safety mechanisms designed for stopping
the operation.
No modification has been made in the machine controls which obstructs the safety mechanisms.
The output of this device is detected correctly.
The wiring from this device is correct.
The overall response time of the complete machine is equal to or less than the calculated value.
The actual number of operation cycles (time) of the limited lifetime parts (relay, etc.) is less than their
rated operation cycles (time).
No screws or connectors of this device are loose.
No extraneous light source or reflective object has been added near this device.
SEN TRONIC
AG
Produkte, Support und Service
DANGER!
Be sure to inspect the following items every six months and
confirm that there is no error. Operating this device without
inspection or in an error condition can result in serious injury or
death.
Rugghölzli 2
CH - 5453 Busslingen
4.2 Periodic Inspection Checklist (Every Six Months)
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
77
mailbox@sentronic.com
www.sentronic.com

Advertisement

Table of Contents
loading

Table of Contents