Specifications, Sensor St4-A - Panasonic ST4 Instruction Manual

Safety beam sensor
Hide thumbs Also See for ST4:
Table of Contents

Advertisement

Specifications

6.3 Specifications, Sensor ST4-A□

Type
Model No.
(Note 1)
Sensing range
Standard sensing object
Effective aperture angle
(EAA)
Supply voltage
Current consumption
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
Withstand voltage
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
Cable
Extension cable
Weight
Applicable standard
(Note 2)
NOTE
1. Features encoded in the model no. on the name plate of the product:
ST4-A1- x -J x x
2. Complies with those standards only when the sensor is used in combination
with the controller ST4-C11/ST4-C12EX.
92
SEN TRONIC
AG
Produkte, Support und Service
Cable length 0.2m
ST4-A1-J02
(with emission
amount adjuster)
±2.5 degree (or less for a sensing range exceeding 3m)
Emitter: 11mA or less, Receiver: 9mA or less
-10 to +55°C (no dew condensation or icing allowed)
30 to 85% RH, Storage: 30 to 95% RH
Incandescent lamp: 3,500ℓx at the light-receiving surface
1,000V AC for one minute (between all supply terminals connected together and
20MΩ or more with 500V DC (between all supply terminals connected together and
10 to 55Hz frequency, 0.75mm amplitude in X, Y, and Z directions for two hours each
2
300m/s
acceleration in X, Y, and Z directions for three times each
Infrared LED (Peak emission wavelength: 870nm)
Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic
Shielded cable with connector: 0.2m
Use the optional exclusive cable (see page 93); the total cable length must not exceed
50m (emitter and receiver, respectively, i.e. 100m in total).
Emitter: Approx. 20g
Receiver: Approx. 25g
IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe)
IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3)
Emission amount adjuster
With V: incorporated
Without V: not incorporated
Cable length: 02: 0.2m, 01: 0.1m
Emitter/Receiver: E: Emitter, R: Receiver
Rugghölzli 2
CH - 5453 Busslingen
Panasonic ST4 Instruction Manual
ST4-A1-J02V
ST4-A1-J1
0.1 to 15m
ø9 or more opaque object
Supplied from controller
IP67 (IEC)
Storage: -25 to +70°C
enclosure)
enclosure)
Indicator cover: Acrylic
Shielded cable with connector: 1m
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Cable length 1m
ST4-A1-J1V
(with emission
amount adjuster)
Emitter: Approx. 50g
Receiver: Approx. 50g
mailbox@sentronic.com
www.sentronic.com

Advertisement

Table of Contents
loading

Table of Contents