Applicable Standards/Regulations - Panasonic ST4 Instruction Manual

Introduction

1.3 Applicable Standards/Regulations

This device complies with the following standards and regulations.
•
EU Machinery Directive 98/37/EC, EMC Directive 2004/108/EC
•
EN 61496-1 (Type 4), EN 55011, EN 50178,
EN ISO 13849 (Category 4, PLe), EN 61508-1 to 7 (SIL3)
•
IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe),
IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3)
•
JIS B 9704-1/2 (Type 4), JIS B 9705-1 (ISO 13849-1) (Category 4), JIS C 0508-1 to 7
(SIL3)
•
UL 61496-1/2 (Type 4), UL 1998, CSA C22.2 No.14, CSA C22.2 No.0.8
•
OSHA 1910.212, OSHA 19 10.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06,
ANSI/ISA S84.01 (SIL3)
NOTE
•
Conformity to JIS, OSHA and ANSI for this device has been evaluated by us.
•
directive. The CE-mark indicates that this product conforms to the EMC
directive.
•
•
Canadian and U.S. requirements.
•
If you want to use this device in a location other than already described (see
page 3), confirm first that the intended use complies with the standards or
regulations applicable in your region or country.
6
SEN TRONIC
AG
Produkte, Support und Service
: This device conforms to the EMC directive and the Machinery
: This device is certified by TÜV Süd.
: The C-CL US Listing Mark indicates compliance with both
Rugghölzli 2
CH - 5453 Busslingen
Panasonic ST4 Instruction Manual
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com