Connecting Multiple Sensors Heads - Panasonic ST4 Instruction Manual

Panasonic ST4 Instruction Manual
Arrangement of the emitter and receiver horizontally on opposite sides
ST4-A□
Emitter
Receiver
ST4-C11
ST4-C12EX
Installation of a barrier
ST4-A□
Emitter
NOTE
The preceding arrangements are just examples of device placement. If there are
any questions or problems, please contact our office.

2.3.5 Connecting Multiple Sensors Heads

You can connect up to six units of the ST4-A□ per controller.
The cable length between all emitters and the controller, as well as between all receivers and
the controller, must not exceed 50m, respectively.
SEN TRONIC
AG
Produkte, Support und Service
Receiver
Emitter
ST4-A□
or
ST4-A□
Receiver
Emitter Receiver
Barrier
or
ST4-C11
ST4-C12EX
Rugghölzli 2
CH - 5453 Busslingen
2.3 Protection Area
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
23
mailbox@sentronic.com
www.sentronic.com