General Information - Johnson Controls P2000 Hardware Installation

CKM-MR16OUT
24-10707-82 Rev. D
CKM-MR16OUT T
This document provides hardware installation and setup instructions for
CKM-MR16OUT, the authentic Mercury™ terminal module. This document is
divided into the following sections:
•

General Information

• Mounting Information
• Wiring Information
• Setup Information
• Status LEDs on page 7
• Specifications on page 8
• Maintenance on page 9
G I
ENERAL NFORMATION
The CKM-MR16OUT output terminal module provides a solution to the OEM
system integrator for output control. The controller has 16 form-C contact
relays for load switching. Additionally, 2 digital inputs are provided for tamper
and power fault status monitoring. The CKM-MR16OUT requires 12 to 24
VDC for power.
ERMINAL
on page 1
on page 2
on page 2
on page 5
1
Hardware Installation Manual
M
ODULE