Johnson Controls P2000 Hardware Installation page 4

UNDERWRITERS LABORATORIES COMPLIANCE VERIFICATION SHEET
The following model number is listed under Underwriters Laboratories® (UL) 1076 for Proprietary
Burglar Alarm Units and Systems, UL 294 for Access Control Systems Units and Underwriters
Laboratories of Canada ULC/ORD-C1076-86.
When installed at the site the following requirements must be met to comply with these standards.
1. The CKM-MR16OUT shall be mounted in Listed Enclosures CCKM-CE75-E2M, CKM-
CE150-E4M, and Listed Burglar Alarm and Access Control System Units SPF10000-1I00,
SPF1I100-1I00 or SPF1I300-1J00.
2. A CKM-MR16OUT mounted in Listed Enclosures CKM-CE75-E2M, CKM-CE150-E4M, and
Listed Burglar Alarm and Access Control System Units SPF10000-1I00, SPF1I100-1I00 or
SPF1I300-1J00 shall be powered through the CKM-F8P power distribution module.
3. Transient protection devices that are installed must not be removed or defeated.
4. Do not connect equipment to an AC power source that is controlled by a switch.
5. Power for devices connected through relay/control output wiring must be provided by a UL
Listed power limited power source.
6. Encrypted communication has not investigated by Underwriters Laboratories.
7. Suitable for use with the model P2K-nnn-UL-x Security Management System, where n can be
any number 0 through 9 and where x can be any three letters A through Z.
8. UL 294 Performance Levels
Destructive Attack
Endurance
Line Security
Standby Power
CKM-MR16OUT
Level I
Level IV
Level I
Level I