Linux Tcp/Ip Settings - Zoom Gateway/Router V3 User Manual

For Mac OS 7.6.1 - 9.2.2
1 1 1 1
From the Apple menu, choose Control Panels and then
TCP/IP to display the TCP/IP Window.
2 2 2 2
Under Connect via:, select Ethernet built-in.
Under Configure:, select Using DHCP Server.
Do not enter anything in the DHCP Client ID field.
3 3 3 3
Close the TCP/IP Window. You will be asked if you want to
save the changes. Click Save.
4 4 4 4
Now return to Configuring Your V3 on page 14.

Linux TCP/IP Settings

The instructions for setting up boot-time DHCP vary dramatically
by distribution, so you may want to refer to your particular
version's documentation.
Note: If you have more than one network card installed, you will
need to pick distinct Ethernet identifiers for each (eth0, eth1, eth2,
etc.). If you select an identifier other than eth0 for your ADSL
modem, use that identifier throughout.
Appendix C: Macintosh and Linux Users: Setting TCP/IP Network Settings 69