Zoom Gateway/Router V3 User Manual page 49

c c c c Continue with Step 6.
6 6 6 6
All Users: Go back to the V3's Advanced Setup page
and click the DMZ button to open the DMZ
Configuration page.
If you already closed the Zoom Configuration Manager,
double-click the Zoom V3 icon on your desktop (or type
10.2.2.2 in your Web browser) and click the Advanced Setup
icon.
7 7 7 7
Configure the DMZ.
Select Enable from the DMZ list, and enter 10.2.2.16 in the DMZ
Host IP box. Click Save Changes and then click Write Settings
to Flash and Reboot. You're done!
Important:
Outside users will need to know the V3's WAN IP address. To
find this address, click the System Status icon at the top of any
Zoom Configuration Manager page and scroll down to the
WAN Status section.
Chapter 3: Playing Online Games 49