Zoom Gateway/Router V3 User Manual page 74

3 3 3 3
If you are using a static IP address, check that your
IP settings are okay.
For Windows 2000 and XP:
Click the Use the following IP address and Use the
following DNS server addresses buttons so that a black dot
appears. Then enter the settings for IP address, Subnet
mask, Default gateway, and Preferred DNS server assigned
by your provider.
For Windows 98 and Me:
Click Specify an IP address and enter the settings for IP
Address and Subnet Mask as assigned by your provider.
Now click the DNS Configuration tab. Then click Enable
DNS. Enter any name (i.e., your name, the words "My
Computer", a favorite word, or any other letters or numbers)
in the box labeled Host:. A Host: name is required.
Fill in the DNS Server Search Order box with the number
10.2.2.2, click Add, and then click the Gateway tab near the
top of the page. Fill in the New gateway: box with the
number 10.2.2.2, and click Add
Your service provider's broadband connection is
functioning properly.
Unplug the Ethernet cable that you plugged into the V3's
WAN jack (the one that you unplugged from your PC). Plug it
back into the PC and see if you are able to connect to the
Internet. If you are not able to connect, contact your service
provider.
Your service provider's broadband connection is functioning
properly by placing a call to customer support.
I type http://10.2.2.2 into my Web browser's address bar, but
the V3's Network Password box won't open so I can't
communicate with the V3.
74
.
Zoom V3 User's Guide