Step 3: Configuring Internet Explorer - Zoom Gateway/Router V3 User Manual

Step 3: Configuring Internet
Explorer
Macintosh and Linux users: Your Web browser is set up
automatically, so you can skip this section. Turn to page 68 to
make sure that your computer's TCP/IP settings are configured
correctly.
Windows users: The software that you use to make an Internet
connection must be set for a network connection, not a dial-up
connection. If you are already using a cable or DSL modem, you
shouldn't need to do anything. If you are just setting up your cable
or DSL Internet connection for the first time, we have included
instructions. The following instructions are for Internet Explorer, a
popular Web browser. If you are using Netscape Navigator or
another browser, set it up now to use a network connection (this
might be called a "Local Area Network" or "broadband"
connection).
If you use Internet Explorer, you need Version 5 or later. Most
people have the right version. If you don't, we suggest you get a
free upgrade. If you want to check your version number, open
Internet Explorer, select Help, then About Internet Explorer.
Your version number is right under the Microsoft Internet
Explorer logo. You can ignore all the numbers after the period
following the first digit.
1 1 1 1
On the desktop, right-click (not left-click) the Internet
Explorer icon, and select Properties.
If you cannot access Internet Explorer:
Windows XP users: From the desktop, click the Start button,
then click Control Panel. In Control Panel, click Network
and Internet Options and then click the Internet Options
icon.
Windows 98/Me/2000 users: From the desktop, click the Start
button, point to Settings, and then click Control Panel. In
Control Panel, click the Internet Options icon.
12 Zoom V3 User's Guide