Step 4: Configuring Your V3 - Zoom Gateway/Router V3 User Manual

7 7 7 7
Click Finish.
8 8 8 8
Windows XP users: Close Control Panel.
Windows 98/Me/2000 users: If Internet Explorer is open,
close it before going to the next step of the installation,
Configuring Your V3.

Step 4: Configuring Your V3

If you have a Cable Modem, see below
If you have a DSL Modem, see page 15.
Configuring the V3 for a Cable
Modem
The V3 is set up by default to work with a cable modem, so
additional configuration is normally not required.
1 1 1 1
Go to your Web browser (i.e., Internet Explorer or Netscape
Navigator) and try to connect to a familiar Web address.
2 2 2 2
If you connect successfully, your installation is complete
and you're ready to browse the Web! Continue with Step 5:
Setting up VoIP Service on page 18.
14 Zoom V3 User's Guide