Secure Top Latch; Tighten Set Screw - Assa Abloy Sargent 7300 Series Installation Instructions Manual

7300 Series
Multi-Point Lock
Installation Instructions
5 Addendum (cont.)
i

Secure Top Latch

• Install four (4) 10-24 oval head
screws on the face of the door.
(Figure 42)
• Install six (6) 1/4-20 flat
head screws in the top edge of the
door. (Figure 43)
Note:
Do not fully tighten until all
screws are installed.
j

Tighten Set Screw

Using the supplied 1/8" Allen wrench, tighten the set screw to secure the rod to the LBC. (Figure 44)
IMPORTANT
Latches will not retract if the set screw is not tightened.
1-800-727-5477 • www.sargentlock.com
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Figure 42
Figure 44
20
Figure 43
A8270A 02/20