Table of Contents
Advertisement
7300 Series
Multi-Point Lock
Installation Instructions
3
Installation
a
Check Door
Verify the door is:
• Correct size and hand for opening.
• Correctly prepared to Template 4740.
IMPORTANT
If measurement is incorrect, DO NOT PROCEED
WITH INSTALLATION. Contact door manufacturer.
(Figure 1)
b
Door Installation
Hang the door on the frame.
IMPORTANT
If the door rubs along the floor, do not complete
this installation! Contact door manufacturer.
c
Install Top Strike into Door Frame
• Remove the strike filler plate and screws and discard.
• Install four (4) #12-24 socket cap flat head screws. (Figure 2).
1-800-727-5477 • www.sargentlock.com
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Outswing Door
Shown
L C
of Lockbody
39-9/16"
X
± 5/64"
(101.4 cm)
Figure 1
Figure 2
6
A8270A 02/20
Advertisement
Table of Contents
