Install Latch & Scalp (All); Install Privacy Plate (Tl3720 Only) - Assa Abloy Corbin Russwin TL3700 Series Installation Instructions Manual

TL3700 Series
Designer Trim
Installation Instructions
1 Full-Trim (TL3710 & 3720) & Half-Trim (TL3780) Installation (cont .)
c Install Latch & Scalp (All)
Note:
• (TL3720 Only) The threaded button on the latch faces the inside of the door (For privacy button).
• Rotate latch head to match door hand (Round side hits strike first).
d

Install Privacy Plate (TL3720 Only)

Install privacy plate and button on inside of door.
Inside of door
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2011, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 3
Note:
Privacy plate with bigger
hole goes on inside of door.
Figure 4
4
Align privacy button
FM341 07/19