9. TYPICAL WIRING DIAGRAM
Typical wiring diagram is shown below:
10. INSTALLATION
The controller is designed for panel mounting, it is held with the help of fixing clips.
Overall and cutout dimensions can be seen below (unit: mm)
1)
Battery Voltage Input
NOTE: HGM501 controller is suitable for 9-18 VDC battery voltage. Battery
negative must be reliably connected to the enclosure of the engine. The
controller power supply B+ and B- must be connected to battery positive and
HGM501 Genset Controller
HGM501Genset Controller
Version V1.0
2012-07-10
Page 14 of 15