Table of Contents
Advertisement
OPERATION AND MAINTENANCE
Storage
Preparing the Grain Drill for storage during extended
periods of time will not only help protect the drill, but
insure that it will be maintained, serviced, and ready for
the next planting season.
1. Clean out any remaining seed from the boxes and
meters before storage.
2. Wash or blow off any remaining dirt, mud or residue
from the drill.
3. Inspect the drill for worn or broken parts. Make
repairs and service during the off season to prevent
delays.
4. Check opener pinch point for proper adjustment
"Opener Blade Adjustment" on page
4-48
5. Clean and repack the wheel bearings (pull hitch)
(See "Wheel Bearing Maintenance" on
page
6. Inspect all nuts and bolts for tightness.
7. Touch up any scratches or chips with spray paint to
protect the metal.
8. Check and inflate tires to the proper air pressure.
9. Lubricate the drill at all points
Maintenance" on page
10. Store the drill inside if possible. If stored outside,
cover with a tarp.
(See
4-36.).
4-46.).
(See "Lubrication
4-47.).
F-1058-0820
Advertisement
Table of Contents
