Field Acres - Landoll 5110NG Operator's Manual

OPERATION AND MAINTENANCE

Field Acres

1. Press the FUNC button until the "FIELD" LED is lit.
The digits indicate the acres covered since the field
acre counter was cleared
2. To clear the field acre count, press the UP and
DOWN buttons simultaneously for two seconds. If a
password has been entered, you will not be able to
clear the total acre count.
3. Field acres will count in tenths of an acre up to
9999.9 acres.
Acre Counter
FIELD TOTAL PULSES WIDTH P-WORD BATT
ACRES
*
Figure 4-46: Field Acres Display
4-42
See Figure 4-46.
417.0
Total Acres
1. Press the FUNC button until the "FIELD" and
"TOTAL" LEDs are lit. The digits indicate the acres
covered since the total acre counter was cleared
Figure 4-47.
2. To clear the total acre count, press and hold the UP
and DOWN buttons for two seconds. If a password
has been entered, you will not be able to clear the
total acre count.
3. Total acres will count from .1 to 99999 acres.
Acre Counter
FIELD TOTAL PULSES WIDTH P-WORD BATT
ACRES
10485.0
*
Figure 4-47: Total Acres Display
See
F-1058-0820