OPERATION AND MAINTENANCE
Ladder Use and Transport
Requirements
1. When transporting the 5110NG Grain Drill:
a. The ladder should be in the raised position
(laying across the top of the walkboard) and
secured with the pin
b. The ladder should also be in the raised position
when working in the field to prevent damage
when working near trees, fences, power lines,
etc.
2. When using the ladder:
a. Lower ladder to the down position and place pin
in the storage location to gain access to the seed
boxes
See Figure 4-44
b. The handle is located on the left end of the drill
for access.
Never allow riders on the ladders or walkboards
while the drill is in operation or being
transported.
4-40
See Figure
4-43.
WARNING
HANDLE
WALKBOARD
QUICK
HITCH PIN
LADDER
Figure 4-43: Ladder Transport/Planting Position
WALKBOARD
HANDLE
QUICK
HITCH PIN
LADDER
Figure 4-44: Ladder Down Position
F-1058-0820