Restoring To Factory Default; Using The Web Interface00; Directly On The Camera - GeoVision GV-IP Speed Dome Quick Start Manual

7. Restoring to Factory Default

If for any reason the camera is not responding correctly, you can restore the camera back
to its factory default settings using the Web interface or the Default Button.
7.1 Using the Web Interface
To restore to default settings using the Web interface:
1. Select System at the top > Factory Default. This page appears.
2. Select Full Restore, Partial Restore, or Reboot.
Note: See details in 2.2.14 Factory Default, GV-IP Speed Dome User's Manual.

7.2 Directly on the Camera

1. Press and hold the Default Button for about 20 seconds. For GV-QSD5730, see 1.2 Overview
of GV-QSD5730; for GV-QSD5731-IR, see 1.3 Overview of GV-QSD5731-IR.
2. When the camera rotates twice, the process of loading default is completed and the camera
reboots automatically.
Restoring to Factory Default
7
17