Table of Contents
Advertisement
2. Installation
In the following sections, you will learn how to install GV-QSD5730 to the ceiling with standard
packages and how to install GV-QSD5731-IR with optional GV-Mount accessories.
2.1 Installing GV-QSD5730
Required Items
1.
Determine a ceiling location for camera installation. Stick the drill template paster to the
ceiling, and then drill a hole of radius 192 mm according to the drill template.
2.
Remove the dome cover by turning the dome cover counter-clockwise and insert the SD
card.
Tool for drilling a hole on the ceiling (user-prepared)
M4 Crosshead Screw Driver (user-prepared)
SD card (user-prepared)
5
Installation
2
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-IP Speed Dome and is the answer not in the manual?