Software Requirements - LogTag Recorders UTREL-16 Product User Manual

Usb pdf low-temperature recorder with remote probe and display

Table of Contents

What You Need

a silica sand temperature buffer, which simulates environmental behaviour of a

vaccine vial

Software Requirements

Software requirements vary depending on the type of file you want the UTREL-16 to

generate when plugged into a USB port.

If you wish to configure

Analyzer software from LogTag

https://logtagrecorders.com/software/lta3/download/. Follow the instructions to install

and start the software.

If you only plan to view a

Depending on the settings made during configuration, a number of on-board files will be

generated

and made available to you in a new drive:

a PDF file

you can open the file directly from the logger's USB memory storage with Acrobat

Reader 4.0 or later, or any other compatible PDF reader software of your choice

a CSV file

this file can be imported into a spreadsheet program such as Microsoft Excel

an LTD file

LTD files are LogTag

in LogTag

Analyzer, where you can analyze data in detail, generate report files or

combine data from multiple recorders for comparison

Depending on the configuration, the UTREL-16 may produce all, some or none of the files.

PDF files generated by any USB logger can be opened directly in LogTag

UTREL-16 User Guide

UTREL-16 products you will need to download the LogTag

's web site at

report, plug the UTREL-16 into a computer's USB port.

Analyzer's native, encrypted data files. You can open this file

Analyzer.

Table of Contents

Do you have a question about the UTREL-16 and is the answer not in the manual?