Display Overview - LogTag Recorders UTREL-16 Product User Manual

Display Overview

Display Overview
ALARM/OK indicator
The symbol is shown as soon as the UTREL-16 has registered an alarm event. While there are no
alarms, the symbol is shown.
Recording indicators
The recording indicators show what the UTREL-16 is currently recording.
If is shown, the UTREL-16 is ready to be started with the
READY
l
Depending on the configuration it may already record pre-start readings.
If is shown, the UTREL-16 is recording temperature at the sample interval defined
l
during configuration.
If is shown together with the word
l
recorded values are not taken into account when calculating alarm events and durations.
If the word
STOPPED
l
Mark indicator
The word is shown when the next temperature reading is identified with an inspection mark
MARK
in the recorded data.
MIN/MAX indicator
The word is shown when the temperature on the display represents the maximum
MAX
recorded temperature for the current trip. The word
on the display represents the minimum recorded temperature for the current trip
Temperature Units
Depending on the selected PDF temperature units, this shows either °F or °C.
9
If MIN/MAX data were reset during the trip, these temperatures reflect only the period since the reset took place.
UTREL-16 User Guide
PAUSED
is shown, the UTREL-16 has finished recording temperature data.
START
/Mark
, the product is also recording, but the
is shown when the temperature
MIN
19
button.
9
.