Utrel-16 Start Options - LogTag Recorders UTREL-16 Product User Manual

Configuring the UTREL-16 for logging UTREL-16 User Guide 14

UTREL-16 Start Options

®
During configuration with LogTag Analyzer you can decide when the UTREL-16 starts
taking temperature readings:
Push button start
The logger will start taking temperature readings as soon as you have pressed the
button (see Starting the Logger on page 22).
START
/Mark
When you choose the push button start option, you can Enable pre-start logging (or
disable it) and also Begin recording after a delay.
Pre-start readings
If you enable pre-start readings, the UTREL-16 starts recording as soon as it is unplugged
7
from the USB port and will continue to do so until you start the unit via the button. No
alarms are processed while pre-start readings are being taken, pre-start readings will not
appear in the PDF file after the logger was started, and no PDF file will be generated if only
pre-start readings are present in the logger. Using pre-start readings is a good way to
avoid data loss if you forget to start the unit, as you can still access the data using
®
LogTag Analyzer.
Start delay
If you configure the UTREL-16 to start after a delay period, the logger will not immediately
record temperature readings after you have pressed , but start a countdown
START
/Mark
timer instead, and record readings only after the timer has ended. The value for the timer
is set during configuration. If pre-start readings are enabled, these will continue to be
recorded during the delay period.
Date/Time start
The logger will start taking temperature readings at the date and time you enter during
configuration (local time). You cannot combine a date/time start with pre-start readings or
the start delay function.
7
The first pre-start reading is taken one log interval after you unplug the unit from the USB port.