LogTag Recorders UTREL-16 Product User Manual page 30

Operating the Logger
Resetting the Trip Minimum/Maximum Temperatures
The currently stored Min/Max temperature values can be reset at any time while the unit is
recording, but not once the unit has been stopped.
To reset the values, follow this procedure:
Press
STOP
/Review
l
Press
STOP
/Review
l
You can only complete the next steps if you are viewing the Minimum
temperature screen!
Press and hold
l
and then repeat once:
After approx. 5 seconds, following screen will show:
l
Release the
STOP
be reset, and the normal recording screen will be shown.
If you keep holding the
l
be retained.
UTREL-16 User Guide
to display the trip maximum temperature value.
again to display the trip minimum temperature value.
. After 1 second the following screen sequence will show,
STOP
/Review
button when the screens no longer alternate. The values will
/Review
STOP
/Review
button, the currently stored min/max values will
30