Stopping The Utrel-16 - LogTag Recorders UTREL-16 Product User Manual

Operating the Logger

Stopping the UTREL-16

Automatically
The UTREL-16 automatically stops recording temperature when the maximum number of
readings specified during configuration has been reached. Your unit can also be set up to
stop when it is inserted into a USB socket. This option needs to be set up at the factory
and cannot be changed during configuration with LogTag
supply more information about this option.
Manually
You can configure a UTREL-16 so it can be stopped with the
feature is useful when you take the logger out of a shipment and don't want to falsify the
statistics with readings taken after the shipment completion. The stop function is enabled
in the Advanced Options
Press and hold the
symbol shows in addition to
The symbol turns off after 2 seconds. Release the
button and the logger stops taking temperature readings.
If the button is released while
display shows
inspection mark will be recorded in the data against the next temperature reading. The
symbol will show, and the
MARK
Unlike some other LogTag
cleared before the logger can be stopped.
Logger has stopped
Once the logger has stopped, the display will show:
the
STOPPED
l
the OK indicator (
l
the alarm indicator ( ) and one or both alarm threshold(
l
was recorded during the trip that has not been cleared
the current time
l
the battery low symbol (
l
The logger does not show a temperature reading.
UTREL-16 User Guide
dialogue during configuration.
button. The
STOP
/Review
for 2 seconds.
is still on, or you wait until
again, and the logger continues to record data. In this case, an
PAUSED
®
products with display, the alarm does not have to be
symbol
) if no alarm was recorded
) if the battery is low
®
Analyzer. Your distributor can
STOP
STOPPED
symbol also shows if this feature is enabled.
button. This
/Review
disappears, the
STOPPED
) indicators if an alarm
34