Plugging The Utrel-16 Into A Usb Port - LogTag Recorders UTREL-16 Product User Manual

Operating the Logger

Plugging the UTREL-16 into a USB port

As soon as you plug the UTREL-16 into a USB port, the word USb appears.
If you have configured the logger to generate files, USb remains turned on until all files
have been generated.
During the file generation a small animation will play on the display.
As soon as the file generation is finished, USb will blink every second to indicate these files
can now be accessed.
The files are generated each time you plug the logger into the USB port, regardless
of whether the logger is still recording readings or not.
What happens on your computer depends on the operating system of the computer, the
settings made during configuration and whether or not LogTag
Microsoft Windows
Up to four drivers will now be installed, depending on the UTREL-16's configuration.
All drivers are part of the operating system and will typically not require administrator
privileges for your computer.
1. Mass Storage Device
2. LogTag Mass Storage USB Device
These two devices are required so you can access the data files in the same way as a
USB memory stick. These drivers will not be installed if the UTREL-16 does not
generate files.
3. USB Input Device (HID)
This device is used for communication to LogTag
be installed, even if LogTag
UTREL-16 User Guide
®
Analyzer is not present on the computer.
®
Analyzer is running.
®
Analyzer and its driver will always
36