Table of Contents
Advertisement
Device Manager
netFIELD Connect | User manual
DOC191101UM02EN | Revision 2 | English | 2020-05 | Released | Public
Ø Because the update process cannot be aborted after confirmation, you
should now check carefully whether you have selected the right update
file (and not a recovery file for instance, which would delete all your
configuration settings and containers).
Click Yes if you want to start the update.
Ê The image is uploaded to the device. This might take a few minutes.
After uploading has been finished, the following screen appears:
Figure 51: Upload finished message
Ê The installation process (i.e. the actual update of the OS) is
automatically started. The device reboots and closes the LAN
connection.
Figure 52: OS update "Disconnected" message
Ø Click Reconnect button.
ð You have updated the OS of your device. You can now sign-in again
with your usual login credentials. The new firmware version is indicated
in the bottom left corner of the Device Manager screen.
Note:
If you have performed a recovery (by uploading and installing a
recovery image) instead of an update, all configuration settings
have been deleted, and you now must commission the device again
(see chapter Commissioning and first steps [} page 20]).
68/91
© Hilscher 2020
Advertisement
Chapters
Table of Contents
