Figure 164: Portainer.io - Area "Upload - hilscher NIOT-E-TIJCX-GB-RE User Manual

Isolated application execution with Docker
15.3.8.5 Creating a stack via upload of a Docker compose file
Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise)
DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø Specify your Docker compose file there.
Ø Click at Deploy the stack in area Actions in order to create the stack
ð If the stack has been created successfully, an according message is
displayed.
To create a stack via upload of a Docker compose file:
Ø Proceed as described in .Preparations for creating a stack [} page 231].
Ø If necessary, set environment variables as described in .Set
environment variables [} page 233].
Ø If required, restrict access as described in Define access
control [} page 233].
Ø In area Build method choose option Upload (in the center).
Ê The additional area Upload is now displayed. See the following figure.
Figure 164: portainer.io - Area "Upload"
Ø Click at the blue button Select file.
Ê A file selection dialog opens. Select a valid Docker compose file there.
This is required before the next step can be executed.
Ø Click at Deploy the stack in area Actions in order to create the stack
ð If the stack has been created successfully, an according message is
displayed.
235/292
© Hilscher 2016 – 2019