Table of Contents
Advertisement
Control Panel
8.2.4
Network
8.2.4.1
Configuring Ethernet communication (LAN)
netPI | NOIT-E-NPI3-51-EN-RE
DOC170801UM01EN | Revision 1 - Draft 1 | English | 2017-09 | Draft | Public
Ø Select the package file to be loaded. Debian package files have the
ending *.deb.
Note:
You can find more information on the Debian packet file format in
English at https://en.wikipedia.org/wiki/Deb_(file_format).
ð The package within the selected file is checked for correctness. If the
Edge Gateway accepts the package, the name, creation date, and file
size of the package will be displayed in a line of the table Available.
Ø Click at
ð If the Edge Gateway accepts the file, it will be installed, removed from
the table Available, and displayed in the table Installed.
ð If the package cannot be installed, the message dialog Upload - Failed
to install... appears.
Figure 24: Message box "Upload - Failed to install packages..."
Delete package file from list of available but not yet installed files
Ø Select the package file to be deleted. Package files have the
ending .deb.
Ø Click at
ð The line containing the package file to be deleted is removed from the
list of available but not yet installed files.
Open this page with Network > LAN.
In order to access this page you require the following access right:
Access to LAN (Ethernet network)
On this page you configure the Ethernet interfaces eth0, eth1 (both on
the side of the cloud) and cifx0 (on the side of the fieldbus). For each
Ethernet interface you can configure how to set the IP address:
·
The Edge Gateway is to obtain the IP address parameters automatically
from a DHCP server: Option DHCP.
·
The IP address parameters are manually entered by the user: Option
Fixed address.
.
.
35/57
© Hilscher 2017
Advertisement
Chapters
Table of Contents
